Products - Fransgard TI Combi Rake

TI 4000/TI 5000/TI 6000 Combi Rakes A combination tedder - rake which in the 3-point hitch version allows multiple windrow placement possibilities : centred, to the outside, simultaneously to the middle and outside, or tedding.
Available working widths of 2,80 - 6,20 metre. (9' - 20'6").
Also available TI 6000FL front linkage model
The combi rake of the future.

Fransgard is in possession of a world patent on these model TI Combi rakes.
Download PDF brochures TI4000 / TI600
Download PDF brochure TI5000
Download PDF brochure TI6000FL

 


TI6000FL VIDEO

5 WHEEL FINGER RAKE
The AGROMASTER Finger Wheel Rakes lift the hay gently even from rough terrain turning and spreading swaths. It’s fast working speed makes it possible to cover large
Acreages quickly. Also due to not containing gears, chains or other drive components to wear out, the finger wheel rakes is a low maintenance tool. The finger wheel
rakes are most suitable for tractors from 30 to 80 HP with a Cat 1 or 2 hitch.
Download PDF Brochure
342-344 & 414 QUAD RAKE

 

The AGROMASTER rotary rakes are available in three models and two raking widths.

The Model 342 has 9 arms with a working width of 3.4 metres and has two wheels.

The Model 344 has 9 arms with a working width of 3.4 metres and has quad wheels.

The Model 414 (shown at left) covers 4.1 metres and also has quad wheels.

Download PDF Brochure

V-Rakes

 

The H & S V Rakes have the flexibility to rake with one side only.  Sizes available include 8, 10, 12 wheel models.  
USING THE HITCH JACK, THE OPERATOR CAN ADJUST THE WINDROW WIDTH.

THE OPERATOR CAN ADJUST THE FINE TUNE SPRING TO ALLOW PROPER RAKE WHEEL DOWN PRESSURE.

A SINGLE ACTING CYLINDER COUPLED WITH A SIMPLE LINKAGE SYSTEM ALLOWS FOR EASY RAISING AND LOWERING OF RAKE WINGS.

Download PDF Brochure

©2010

TOP